28
The Easy Way To Detect The Difficulties While Turn On Cars
Cars that are difficult to be turned on or strike could occur at any time and place any type of car. In fact, during this incident proves, a car that previously showed no problems at all difficult started suddenly shortly after the car stops.
According to the observer Tirtadji engine problems and leadership of TSM Motor, Kemayoran, North Jakarta, causing the car is difficult distarter electrical systems and engine problems.
“That experience when dealing with problems of our customers cars and pay attention to complaints of car owners in general,” he said, Monday, April 4.
So what is the matter? How do I prevent or overcome them if the problem occurs? Here Tirtadji share tips for you:
Automobile electrical system consists of several parts starting from the alternator or power source that is commonly called ampere dynamo, magneto ignition, battery, and several sets of supporters such as fuses, and cable network systems.
If your car suddenly stalled or difficult turned on, you should take several steps:
1. Check condition of alternator
One of the functions of these devices is to fill an electrical current to the battery. When the alternator problem then the car electrical system is not functioning, the result difficult started or stalled cars.
How to check the condition of the alternator is fairly easy. The first way, you can see the instrument panel depicts a battery indicator. When a picture is solid, the alternator problem, and so forth.
If the car you do not already have an indicator like that, you can perform the way traditionally. Find obel or spanner wrench and then attach it to the alternator pulley.
If the screwdriver or wrench is interested, it means there is still a magnetic force and electrical current. “It means that the alternator is still okay,” said Tirtadji.
However, if you have a voltmeter and take it, then checks will be easier. The reason is, you can simply put the needle plus and minus to the end of each side of the alternator.
Stndar electric current alternator is 13-15 volts. If less than the lowest rate or 13 means the alternator problem. And vice versa. When the alternator was not a problem then, you need to check the battery condition.
2. Check battery
If your car still uses wet batteries, how checks will be much easier. First, note the battery liquid or water if the volume is still quite a lot. When reduced, the battery will come up short, especially if the battery life has been more than two years.
“As a result machine started difficult,” said Tirtadji.
However, if the battery is still relatively new and fluid is still normal. Check the cables on battery terminals, if there is dirt or crust. Similarly, make sure no wires are cut off at the terminal.
If the cable condition is still normal and not problematic divert your attention to the fuse. The device is located near the positive terminal of battery. Make sure the fuse is not broken.
3. The series of ignition cable and socket
When the fuse away from the problem of alias conditions are still normal, try checking the ignition key socket is loose or not. The reason is, if the socket loosen the connection of electric current between the key with the lighter engine nor, consequently difficult turned on the machine.